Microbit RRC-1258 MkII(s) Bedienungsanleitung PDF herunterladen (Seite 15)

2. Locate the port forwarding page. On the Linksys router, this is under Applications and Gaming. With

other routers, likely it will be under a similar heading. Enter the following data as shown in Figure 11.

Be sure to check Enable for each entry, and then click on Save Settings to save the changes.

Application Start End Protocol IP Address

RRIG_cmd 13002 13002 Both (UDP and TCP) 192.168.1.170

RRIG_audio 13001 13001 Both (UDP and TCP) 192.168.1.170

RRIG_sip 13000 13000 Both (UDP and TCP) 192.168.1.170

*Note, if you have a VoIP Phone system, these default ports may conflict and need to be changed.

Figure 11

3. Save your changes. *Note, the router may need to be rebooted for settings to take effect.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 26 27

Keine Kommentare

Microbit RRC-1258 MkII(s) Bedienungsanleitung Seite 15