Microbit RRC-1258 MkII(s) Bedienungsanleitung PDF herunterladen (Seite 159)

USER MANUAL

m crob t

RRC-1258 MKII

Ba1258B_RemoteRig_MkIIs-A33.docx

User manual

Rev. A33 – 2015 Jan 28

159 of 236

Connections

The cabling is quite simple and can be done with standard patch cables. Drawings of the

connection cables can be found below.

Control-RRC:

 The control cable Y13a a standard RJ-45 patch cable should be connected between the

Control panel and the AUX/MIC connector.

 The original microphone should be connected direct to the radio front panel as usual.

 A pair of speakers are connected direct to the RRC SP-jack with a 3.5 mm stereo plug. A

set of amplified PC speakers will work very well also.

Radio-RRC:

 The control cable Y14a a standard RJ-45 patch cable should be connected between the

Radio-RRC AUX/MIC jack and the Radio.

 The speaker cable (Y14bc) eg. a standard cable with 3.5 mm mono connectors in both

ends should be connected between the radio and the Radio-RRC speaker jack.

Power supply

Control-RRC:

The Control-RRC is supplied with a common 13,8 V (10-18V) power supply. The display and

speaker amplifier needs a lot of power so you need 1A.

Radio-RRC:

The Radio-RRC should be supplied from the same power supply as the radio to avoid

humming. Please put a small fuse on the cable if you connect it to a 30 Amp PS.

1 2 ... 154 155 156 157 158 159 160 161 162 163 164 ... 235 236

Keine Kommentare

Microbit RRC-1258 MkII(s) Bedienungsanleitung Seite 159